Sodium Citrate 1:4 Tube

Venous Blood Collection Tube 靜脈采血管

Plain Tube

無添加劑管

0 Additive. This blood collection plain tube designed for clinical specimen acquisition and preservation, supporting diagnostic testing in biochemistry, immunology, trace element analysis, and viral detection.

 Free of anticoagulants, the tube must undergo 37°C incubation for 60 minutes post-phlebotomy to promote serum formation. Visual confirmation of a distinct light-yellow serum layer is mandatory prior to centrifugation to ensure proper specimen processing.

1ml,2ml,2.5ml,3ml,3.5ml,4ml，4.5ml,5ml,5.5ml,6ml， 6.5ml,7ml,7.5ml,8ml,8.5ml,9ml,9.5ml,10ml

Pro-Coagulation Tube

促凝管

Pro-Coagulation Tube is formulated with a calibrated clot activator to ensure optimal specimen processing for clinical diagnostics. This tube supports a broad spectrum of testing applications, including biochemistry, immunology, trace element analysis, and viral pathogen detection. Post-venipuncture, gently invert 5-6 times to activate the clotting cascade, then allow a 30-minute clotting interval prior to centrifugation.

1ml,2ml,2.5ml,3ml,3.5ml,4ml，4.5ml,5ml,5.5ml,6ml，6.5ml,7ml,7.5ml,8ml,8.5ml,9ml, 9.5ml,10ml

Gel + Clot Activator

分離膠-促凝劑

Gel + Clot Activator tube is carefully prepared with a separating gel and a clot activator. This tube is specifically designed for blood collection and storage, which are essential for a wide range of clinical tests, including biochemistry, immunology, trace - element analysis, and various types of virus detection.

Once the blood has been successfully collected into the tube, it is crucial to gently invert the tube 5 - 6 times. This action effectively activates the clotting process. After that, you need to allow the tube to stand undisturbed for 30 minutes to ensure proper clot formation.

When it comes to centrifugation, the centrifuge should be set at a relative centrifugal force (RCF) of 1500 - 1700 for a duration of 10 minutes. This specific centrifugation protocol will help in achieving the best separation of the blood components for accurate test results

2ml,3ml,3.5ml,4ml, 4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml,8.5ml,9ml

EDTA Tube

肝素鈉

EDTA Tube is filled with either K2EDTA or K3EDTA, which are essential for conducting routine blood tests. This tube is equipped with a rubber stopper that has been rigorously tested and is fully compatible with all types of analyzer probes.

When performing a blood draw into the EDTA Tube, immediately after the collection is complete, it's of utmost importance to invert the tube 8 - 10 times. This action ensures that the anticoagulant (K2EDTA or K3EDTA) thoroughly mixes with the blood, preventing clotting and maintaining the sample's integrity for accurate analysis.

Moreover, just before initiating any experiment using the blood sample in this tube, you should invert the tube a few times. This final step helps to homogenize the sample, ensuring consistent and reliable test results.

1ml,2ml,2.5ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml,8.5ml,9ml,9.5ml,10ml

Heparin Tube

肝素鋰

Heparin Tube is designed for specific medical testing purposes. It is filled with either lithium heparin or sodium heparin, which are utilized for hemorheology studies or emergency biochemistry tests.

When it comes to conducting a sodium - ion test, it is strongly recommended to use the heparin tube containing lithium heparin. This is because the presence of sodium in the sodium heparin tube could potentially interfere with the accuracy of the sodium - ion test results.

After the blood has been successfully collected into the Heparin Tube, it is crucial to gently invert the tube 8 - 10 times. This action ensures that the heparin anticoagulant is thoroughly mixed with the blood, preventing clot formation and maintaining the sample's integrity for accurate analysis.

1ml,2ml,2.5ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8 ml,8.5ml,9ml,9.5ml,10ml

EDTAK2

EDTAK₂ Tube is a specialized blood collection tube containing dipotassium ethylenediaminetetraacetic acid (EDTAK₂) as an anticoagulant. Primarily used in hematology testing, it is essential for applications such as complete blood count (CBC), blood cell morphology analysis, and platelet function studies. After blood collection, the tube should be gently inverted 8-10 times to ensure thorough mixing of EDTAK₂ with the blood, preventing clot formation and preserving cellular integrity for accurate diagnostic results. Its design ensures compatibility with automated analyzers, making it a standard choice for routine blood analyses.

1ml,2ml,2.5ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml,8.5ml,9ml,9.5ml,10ml 

EDTAK3

EDTAK3 Tube is a specialized blood collection tube containing tripotassium ethylenediaminetetraacetic acid (EDTAK3) as an anticoagulant. Primarily utilized in hematology, it is essential for applications such as complete blood count (CBC), differential leukocyte counting, and erythrocyte sedimentation rate (ESR) testing. After blood collection, the tube should be gently inverted 8-10 times to ensure uniform mixing of EDTAK3 with the blood, effectively preventing clot formation and preserving cellular morphology for accurate laboratory analysis. Its standardized design ensures compatibility with automated hematology analyzers, making it a preferred choice for routine blood diagnostics.

1ml,2ml,2.5ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml,8.5ml,9ml,9.5ml,10ml

EDTANa2

EDTANa2 Tube is a specialized blood collection tube containing disodium ethylenediaminetetraacetic acid (EDTANa2) as an anticoagulant. Primarily used in hematology and clinical chemistry, it is essential for applications such as complete blood count (CBC), blood typing, and platelet function tests. After blood collection, the tube should be gently inverted 8-10 times to ensure thorough mixing of EDTANa2 with the blood, preventing clot formation and maintaining sample integrity for accurate analysis. Its design ensures compatibility with automated laboratory equipment, making it a reliable choice for routine diagnostic procedures.

1ml,2ml,2.5ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml,8.5ml,9ml, 9.5ml,10ml

Sodium Fluoride-EDTAK2 Tube

氟化鈉-EDTAK2

Sodium Fluoride-EDTAK2 Tube is a specialized blood collection tube containing a combination of sodium fluoride (a glycolysis inhibitor) and dipotassium ethylenediaminetetraacetic acid (EDTAK2, an anticoagulant). Primarily used in clinical chemistry and toxicology, it is essential for applications such as glucose measurement, blood alcohol testing, and lactate determination, where preserving analytes and preventing glycolysis are critical. After blood collection, the tube should be gently inverted 8-10 times to ensure thorough mixing of sodium fluoride and EDTAK2 with the blood, effectively inhibiting glucose metabolism, preventing clot formation, and maintaining sample stability for accurate diagnostic results. Its design ensures compatibility with automated analyzers, making it a reliable choice for specialized metabolic and toxicological analyses.

1ml,2ml,2.5ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml,9ml

Sodium Fluoride-Potassium Oxalate Tube

氟化鈉-草酸鉀

Sodium Fluoride-Potassium Oxalate Tube is a specialized blood collection tube containing sodium fluoride (glycolysis inhibitor) and potassium oxalate (anticoagulant). Primarily used in clinical chemistry for glucose measurement and metabolic testing, it preserves glucose levels by inhibiting glycolysis while preventing clotting. After blood collection, gently invert the tube 8-10 times to ensure thorough mixing, maintaining sample stability for accurate analysis. Its design ensures compatibility with automated analyzers, making it a reliable choice for specialized metabolic diagnostics.

1ml,2ml,2.5ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml,9ml

Sodium Fluoride - Lithium Heparin Tube

氟化钠-肝素锂

Sodium Fluoride-Lithium Heparin Tube is a specialized blood collection tube containing sodium fluoride (a glycolysis inhibitor) and lithium heparin (an anticoagulant). Primarily used in clinical chemistry, it is essential for applications such as glucose measurement, lactate analysis, and other metabolic tests requiring preservation of analytes by inhibiting glycolysis while preventing clotting. After blood collection, the tube should be gently inverted 8-10 times to ensure thorough mixing of sodium fluoride and lithium heparin with the blood, maintaining sample stability and integrity for accurate analysis. Its design ensures compatibility with automated analyzers, making it a reliable choice for specialized metabolic and emergency biochemical testing.

1ml,2ml,2.5ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml,9ml

 Sodium Citrate 1:9 Tube

檸檬酸鈉 1:9

Sodium Citrate 1:9 Tube is a specialized blood collection tube containing 3.2% sodium citrate as an anticoagulant, formulated to maintain a precise 1:9 blood-to-additive volume ratio. Primarily used in coagulation testing, it is essential for applications such as prothrombin time (PT), activated partial thromboplastin time (APTT), and other coagulation profile assays. After blood collection, gently invert the tube 5-8 times to ensure thorough mixing of sodium citrate with the blood, preventing clot formation and preserving coagulation factors for accurate diagnostic results. Its standardized design ensures compatibility with automated coagulation analyzers, making it the preferred choice for routine coagulation diagnostics.

1ml,1.8ml,2ml,2.5ml,2.7ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml, 8.5ml,9ml

 Sodium Citrate 1:4 Tube

檸檬酸鈉 1:4

Sodium Citrate 1:4 Tube is a specialized blood collection tube containing 3.2% sodium citrate as an anticoagulant, formulated to maintain a precise 1:4 blood-to-additive volume ratio. Primarily used in hematology, it is essential for applications such as erythrocyte sedimentation rate (ESR) testing, where accurate blood-to-anticoagulant proportion is critical for reliable results. After blood collection, gently invert the tube 5-8 times to ensure thorough mixing of sodium citrate with the blood, preventing clot formation and preserving sample integrity for standardized laboratory analysis. Its design ensures compatibility with automated hematology systems, making it a preferred choice for ESR and related sedimentation assays.

1ml,1.6ml,2ml,2.4ml,2.5ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml

Gel Separator-EDTAK2 Tube

分離膠-EDTAK2

Gel Separator-EDTAK2 Tube is a specialized blood collection tube containing dipotassium ethylenediaminetetraacetic acid (EDTAK2) as an anticoagulant and a gel separator for plasma separation. Primarily used in hematology and clinical chemistry, it is ideal for applications such as complete blood count (CBC), hemorheology testing, and plasma-based biochemical or immunological assays requiring anticoagulated samples. After blood collection, gently invert the tube 8-10 times to ensure thorough mixing of EDTAK2 with the blood, preventing clotting. Following centrifugation, the gel forms a barrier to separate plasma from cells, providing a stable supernatant for accurate analysis. Its design ensures compatibility with automated systems, making it a reliable choice for routine and specialized diagnostic procedures.

2ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml,8.5ml

Gel Separator-Lithium Heparin Tube

分離膠-肝素鋰

Gel Separator-Lithium Heparin Tube is a specialized blood collection tube containing lithium heparin (an anticoagulant) and a gel separator for plasma separation. Primarily used in clinical chemistry and emergency medicine, it is essential for applications such as rapid biochemical analysis, electrolyte testing, and immunological assays requiring anticoagulated plasma. After blood collection, gently invert the tube 8-10 times to ensure thorough mixing of lithium heparin with the blood, preventing clotting. Following centrifugation, the gel forms a stable barrier to separate plasma from cells, providing a clear supernatant for accurate and efficient analysis. Its design ensures compatibility with automated systems, making it a preferred choice for time-sensitive diagnostic procedures.

2ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml,8.5ml

Gel Separator-Heparin Sodium

分離膠-肝素鈉

Gel Separator-Heparin Sodium Tube is a specialized blood collection tube containing heparin sodium (an anticoagulant) and a gel separator for plasma separation. Primarily used in clinical chemistry and critical care settings, it is ideal for applications such as rapid biochemical analysis, electrolyte measurements, and thrombin time assays requiring anticoagulated plasma. After blood collection, gently invert the tube 8-10 times to ensure thorough mixing of heparin sodium with the blood, preventing clotting. Following centrifugation, the gel forms a secure barrier to separate plasma from cells, providing a clear supernatant for accurate and efficient diagnostic testing. Its design ensures compatibility with automated analyzers, making it a reliable choice for time-sensitive clinical procedures.

2ml,3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml,7.5ml,8ml,8.5ml

Gel Separator-Sodium Citrate Tube

分离胶-

柠檬酸钠

Gel Separator-Sodium Citrate Tube is a specialized blood collection tube containing sodium citrate (an anticoagulant) and a gel separator for plasma separation. Primarily used in coagulation testing and hematology, it is essential for applications such as prothrombin time (PT), activated partial thromboplastin time (APTT), and other coagulation profile assays. After blood collection, gently invert the tube 5-8 times to ensure thorough mixing of sodium citrate with the blood, preventing clot formation. Following centrifugation, the gel forms a stable barrier to separate plasma from cells, providing a clear supernatant for accurate analysis of coagulation factors and related plasma-based tests. Its design ensures compatibility with automated coagulation analyzers, making it a reliable choice for standardized and efficient diagnostic procedures.

3ml,3.5ml,4ml,4.5ml,5ml,5.5ml,6ml,6.5ml,7ml，8ml，9ml,10ml，12ml,15ml,20ml

Capilllary Blood Collection Tube 末梢血樣采集容器

Capillary Tube

普通管

Capillary Blood Sampling Tubes (Standard) are specialized containers designed for the collection and storage of capillary blood specimens. Primarily used in pediatric diagnostics, point-of-care testing (POCT), and procedures requiring small sample volumes, these tubes are suitable for applications such as complete blood counts, blood typing, and rapid infectious disease screening. To use, simply collect capillary blood using a lancet and transfer the sample into the tube. Ensure proper mixing if required by the test protocol, and follow standard laboratory procedures for analysis. Their standardized design ensures compatibility with automated systems, making them a reliable choice for efficient and accurate point-of-care and pediatric testing.

0.2ml 、0.25ml、0.5 ml、1 ml

Gel Separator and Clot Activator

分離膠-促凝劑

Capillary Blood Sampling Tubes with Gel Separator and Clot Activator are specialized containers designed for efficient collection and processing of capillary blood specimens. Primarily used in clinical chemistry and immunological testing, they facilitate rapid clot formation via the clot activator and subsequent serum separation using the gel barrier. These tubes are ideal for applications such as biochemical assays, serology tests, and therapeutic drug monitoring requiring serum samples. To use, collect capillary blood, gently invert the tube to activate clotting, allow the sample to clot completely, and centrifuge to separate serum from cells. The gel forms a stable barrier, ensuring clear serum supernatant for accurate analysis. Their compact design and compatibility with automated systems make them a reliable choice for point-of-care and pediatric diagnostics.

0.2ml 、0.25ml、0.5 ml、1 ml

Clot Activator

促凝劑

Capillary Blood Sampling Tubes with Clot Activator are specialized containers designed for efficient collection and processing of capillary blood specimens. Primarily used in clinical chemistry and immunological testing, they accelerate blood clotting via the clot activator, enabling rapid serum separation for assays requiring serum samples. To use, collect capillary blood, gently invert the tube to mix the clot activator, allow the sample to clot completely, and centrifuge if necessary to obtain serum. The activator ensures prompt clot formation, reducing turnaround time for diagnostic tests. Their user-friendly design and compatibility with automated systems make them a reliable choice for point-of-care testing and pediatric applications where quick results are essential.

0.2ml 、0.25ml、0.5 ml、1 ml

Heparin Sodium

肝素鈉

Capillary Blood Sampling Tubes with Heparin Sodium are specialized containers designed for the collection and processing of capillary blood specimens requiring anticoagulation. Primarily used in clinical chemistry and point-of-care testing, they are ideal for applications such as electrolyte analysis, blood gas testing, and glucose measurement, where plasma must remain unclotted. To use, collect capillary blood, gently invert the tube 5-8 times to ensure thorough mixing of heparin sodium with the blood, and proceed with testing or centrifugation to separate plasma. Their compact design and compatibility with micro-sampling systems make them a reliable choice for pediatric diagnostics, emergency settings, and procedures requiring small-volume, anticoagulated samples.

0.2ml 、0.25ml、0.5 ml、1 ml

Heparin Lithium

肝素鋰

Capillary Blood Sampling Tubes with Heparin Lithium are specialized containers designed for the collection and processing of capillary blood specimens requiring anticoagulation. Primarily used in clinical chemistry and point-of-care testing, they are ideal for applications such as electrolyte analysis, blood gas testing, and glucose monitoring, where plasma integrity is critical. To use, collect capillary blood, gently invert the tube 5-8 times to ensure thorough mixing of heparin lithium with the blood, and proceed with testing or centrifugation to separate plasma. Their compact design and compatibility with micro-sampling systems make them a reliable choice for pediatric diagnostics, emergency settings, and procedures requiring small-volume, anticoagulated samples.

0.2ml 、0.25ml、0.5 ml、1 ml

EDTAK3

Capillary Blood Sampling Tubes with EDTAK3 are specialized containers designed for the collection and anticoagulation of capillary blood specimens. Primarily used in hematology and point-of-care testing, they contain tripotassium ethylenediaminetetraacetic acid (EDTAK3) to prevent blood clotting, making them ideal for applications such as complete blood count (CBC), blood cell morphology analysis, and platelet function tests. To use, collect capillary blood, gently invert the tube 5-8 times to ensure thorough mixing of EDTAK3 with the blood, and proceed with testing or laboratory analysis. Their compact design and compatibility with automated hematology systems ensure efficient and accurate processing, making them a preferred choice for pediatric diagnostics and small-volume blood testing.

0.2ml 、0.25ml、0.5 ml、1 ml

EDTAK2

Capillary Blood Sampling Tubes with EDTAK2 are specialized containers designed for the collection and anticoagulation of capillary blood specimens. Primarily used in hematology and point-of-care testing, they contain dipotassium ethylenediaminetetraacetic acid (EDTAK2) to prevent blood clotting, making them ideal for applications such as complete blood count (CBC), blood cell morphology analysis, and platelet function tests. To use, collect capillary blood, gently invert the tube 5-8 times to ensure thorough mixing of EDTAK2 with the blood, and proceed with testing or laboratory analysis. Their compact design and compatibility with automated hematology systems ensure efficient and accurate processing, making them a preferred choice for pediatric diagnostics and small-volume blood testing.

0.2ml 、0.25ml、0.5 ml、1 ml

Sodium Fluoride-Potassium Oxalate

氟化鈉-草酸鉀

Capillary Blood Sampling Tubes with Sodium Fluoride-Potassium Oxalate are specialized containers designed for the collection and preservation of capillary blood specimens requiring glycolysis inhibition and anticoagulation. Primarily used in clinical chemistry, they are ideal for applications such as blood glucose measurement, glucose tolerance testing, and lactate assays, where maintaining glucose stability is critical. To use, collect capillary blood, gently invert the tube 5-8 times to ensure thorough mixing of sodium fluoride and potassium oxalate with the blood, inhibiting glycolysis and preventing clotting. Their compact design and compatibility with micro-sampling systems make them a reliable choice for point-of-care testing, pediatric diagnostics, and procedures requiring small-volume, stabilized blood samples.

0.2ml 、0.25ml、0.5 ml、1 ml

Sodium Fluoride - EDTA·K2

氟化鈉-EDTA·K2

Capillary Blood Sampling Tubes with Sodium Fluoride-EDTA·K2 are specialized containers designed for the collection and preservation of capillary blood specimens requiring both glycolysis inhibition and anticoagulation. Primarily used in clinical chemistry and metabolic testing, they are ideal for applications such as blood glucose measurement, glucose tolerance testing, and hemoglobin A1c analysis, where maintaining glucose stability and preventing clotting are critical. To use, collect capillary blood, gently invert the tube 5-8 times to ensure thorough mixing of sodium fluoride (to inhibit glycolysis) and EDTA·K2 (to anticoagulate) with the blood. Their compact design and compatibility with micro-sampling systems make them a reliable choice for point-of-care testing, pediatric diagnostics, and procedures requiring small-volume, stabilized blood samples.

0.2ml 、0.25ml、0.5 ml、1 ml

Sodium Fluoride-Lithium Heparin

氟化鈉-肝素鋰

Capillary Blood Sampling Tubes with Sodium Fluoride-Lithium Heparin are specialized containers designed for the collection and preservation of capillary blood specimens requiring both glycolysis inhibition and anticoagulation. Primarily used in clinical chemistry and metabolic testing, they are ideal for applications such as blood glucose measurement, glucose tolerance testing, and lactate analysis, where maintaining glucose stability and preventing clotting are critical. To use, collect capillary blood, gently invert the tube 5-8 times to ensure thorough mixing of sodium fluoride (to inhibit glycolysis) and lithium heparin (to anticoagulate) with the blood. Their compact design and compatibility with micro-sampling systems make them a reliable choice for point-of-care testing, pediatric diagnostics, and procedures requiring small-volume, stabilized blood samples.

0.2ml 、0.25ml、0.5 ml、1 ml